The requested page could not be found.

Are you looking for:

Pelican™ 1560 Case with Foam (Desert Tan)

Pelican™ 1560 Case with Foam (Desert Tan)

The Pelican™ 1560 case boasts more than 2,800 cubic inches of storage space. Complete with side handle, front handle and convenient extension handle, it will be the perfect rolling travel companion. An added value to this case is the effortless release latch for the 17" retracting extension handle. Also, the metal reinforced padlock protectors provide added strength and extra security against cutting and theft. Optional divider sets available.

The Pelican™ 1560 is a durable, watertight, airtight, dust-proof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements.  Just like all Pelican™ Cases the 1560 case is made of ultra-high impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, two easy-open double throw latches that seal perfectly. It has a built-in, automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by a comfortable rubber over-molded top and side handles, retractable pull extension handle and built-in wheels.

The Pelican™ 1560 case is another popular case in the medium size case category.  Just bigger than the popular 1510 carry on case the 1560 case gives you a little extra room for more stuff.  It's a perfect mid size case between the the smaller mid size cases and the large cases.  Easy to manage with same great protection.

The 1560 case come with the standard case features like the water and dustproof neoprene o-ring seal, Automatic Purge Valve with Gore-Tex membrane, and easy open Double Throw latches. Lifetime Guaranteed. You break it, we replace it forever.

Features:

  • Watertight, crushproof, and dust proof
  • Easy open Double Throw latches
  • Open cell core with solid wall design - strong, light weight
  • O-ring seal
  • Automatic Pressure Equalization Valve
  • Comfortable rubber over-molded top and side handles
  • Stainless steel hardware and padlock protectors
  • 2 level Pick 'N' Pluck™ with convoluted lid foam
  • Personalized nameplate service available
  • Unconditional Lifetime Guarantee of Excellence
  • Retractable extension handle
  • Strong polyurethane wheels with stainless steel bearings

Specifications:

  • Dimensions Inside: 20.37" x 15.43" x 9.00" (51.7 x 39.2 x 22.9 cm)
  • Dimensions Outside: 22.06" x 17.93" x 10.43" (56 x 45.5 x 26.5 cm)
  • Lid Depth: 2.00" (5.1 cm)
  • Bottom Depth: 7.00" (17.8 cm)
  • Total Depth: 9.00" (22.9 cm)
  • Interior Cubic Volume: 1.64 cubic feet (46.36 cubic decimeter)
  • Weight with foam: 20 lbs. (9.07 kg)
  • Weight without foam: 17 lbs. (7.71 kg)
  • Buoyancy: 115 lbs. (52.16 kg)

Pelican™ 1560 Case Material Part Numbers (MPN)


With Foam
  • 1560-000-190: with Foam - Desert Tan
Pelican™ History

For over 30 years Pelican™ has built a reputation for manufacturing the toughest cases in the world. As a matter of fact, Pelican™ invented the category. Over these years we've seen our cases used for some fairly crazy activities...and important ones too.

Pelican™ Cases have been thrown out of helicopters in Iraq, floated through frigid fjords in Norway and rolled over by SUVs in Tanzania. With only a few scratches to show on the outside, contents inside are left unscathed. These are minor details for major bragging rights. And that is really what it's all about. Getting your gear from point A to point B in the condition it's meant to be in: intact and functional. Because it might contain a large format camera that will shoot next month's magazine cover or a heart defibrillator that could save a person's life, you can't put a price on it.



See All Pelican™ Case Categories: All Pelican™ Cases - Micro Cases - Small Cases - Medium Cases - Large Cases - Cube Cases - Gun Cases - Laptop Cases

 
Pelican™ 1510 Case with Foam (Desert Tan)

Pelican™ 1510 Case with Foam (Desert Tan)

The Pelican™ 1510 case with foam, Desert Tan is the toughest and biggest FAA approved airline-legal carry-on case on the market. Complete with side handle, front handle and convenient extension handle, the Pelican™ 1510 case is the perfect rolling travel companion. An added value to this case is the effortless release latch for the extension handle. Also, the padlock protectors provide added strength and extra security against cutting and theft.  

The Pelican™ 1510 Case with foam, Desert Tan is one of our most popular cases we sell because of it's versatility and ability to be a carry  on case.  Just big enough to transport your most essential gear while traveling, keep everything safe.  The wheels and handle make it even easier to move around heavier things while traveling through the airport.  Let us know if you have any questions.  

Also included in the Pelican™ 1510 case with foam, Desert Tan, are features like the water and dustproof neoprene o-ring seal, Automatic Purge Valve with Gore-Tex membrane, and easy open Double Throw latches. Lifetime Guaranteed. You break it, we replace it forever.

This in the largest carry on case we offer. This case comes with transport wheels. Available with foam, without foam (empty) or with padded dividers.  Optional lid organizer is sold separately (item# 1519).

Pelican™ 1510 Case by MPN:
Desert Tan with Foam: 1510-000-190

Pelican™ 1510 Case with Foam, Desert Tan, Features:

  • Watertight, crushproof, and dust proof
  • Retractable extension handle
  • Strong polyurethane wheels with stainless steel bearings
  • Easy open Double Throw latches
  • Open cell core with solid wall design - strong, light weight
  • O-ring seal
  • Automatic Pressure Equalization Valve
  • Comfortable rubber over-molded top and side handles
  • Stainless steel hardware and padlock protectors
  • Personalized nameplate service available
  • Unconditional Lifetime Guarantee of Excellence
  • FAA maximum carry on size
  • Foam version comes with: Pick 'N' Pluck™ with convoluted lid foam 
  • Padded Divider version comes with: Padded Dividers in base with convoluted lid foam

Pelican™ 1510 Case Specifications:

  • Dimensions Inside: 19.75" x 11.00" x 7.60" (50.1 x 27.9 x 19.3 cm)
  • Dimensions Outside: 22.00" x 13.81" x 9.00" (55.9 x 35.1 x 22.9 cm)
  • Lid Depth: 1.79" (4.5 cm)
  • Bottom Depth: 5.79" (14.7 cm)
  • Total Depth: 7.58" (19.2 cm)
  • Interior Cubic Volume: 0.96 cubic feet (27.06 cubic decimeter)
  • Weight with foam: 13.6 lbs. (6.17 kg)
  • Weight without foam: 11.99 lbs. (5.44 kg)
  • Buoyancy: 64.15 lbs. (29.1 kg)
  • Temperature Range: -40 / 210° F (-40 / 99° C)

See All Pelican™ Case Categories: All Pelican™ Cases - Micro Cases - Small Cases - Medium Cases - Large Cases -Cube Cases - Gun Cases - Laptop Cases

Pelican™ 1650 Case with Foam (Desert Tan)

Pelican™ 1650 Case with Foam (Desert Tan)

This Pelican™ 1650 Case comes with Pelican™ unique Pick-N-Pluck™ foam. This foam is pre-cut which allows you to customize the interior by half inch cubes. Trace out the item you want in the case and simply pluck the foam out by hand, no tool required. You can customize your case in less that 15 minutes.

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. These are some of the features of the Pelican™ 1650 Case that offers total protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam for total subjection and protection against impact, vibration or shock. This case comes with 2 transport wheels.

The Pelican™ 1650 Case with foam is on the more popular cases in the Pelican™ large case category.  The length and depth of the case make it a great solution without getting to big and bulky.  It is great for traveling with larger valuables.  

This case is NATO codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association). Unconditionally Guaranteed ... forever.

Pelican™ 1650 Case Features:

  • Fold down main handle, 7" extension handle
  • Seven large latches
  • 2" Transport wheels 

Pelican™ 1650 Case Temperature Rating:

  • Minimum: -10° F (-23° C)
  • Maximum: +210° F (+99° C)

Pelican™ 1650 Case Specifications:

  • Dimensions Inside: 28.57" x 17.52" x 10.65" (72.5 x 44.5 x 27 cm))
  • Dimensions Outside: 31.59" x 20.47" x 12.45" (80.2 x 52 x 31.6 cm)
  • Case Depth: 8.84" (22.4 cm)
  • Total Depth: 10.65" (27 cm)
  • Interior Cubic Volume: 3.08 cubic feet (87.36 cubic decimeter)
  • Weight with foam: 28.06 lbs. (12.73 kg)
  • Weight without foam: 24.03 lbs. (10.9 kg)
  • Buoyancy: Floats in salt water with 200 lbs (90.7 kg) load
Pelican™ Model Numbers

With Foam

1650-020-190: Pelican 1650 with Foam: Desert Tan


See All Pelican™ Case Categories: All Pelican™ Cases - Micro Cases - Small Cases - Medium Cases - Large Cases - Cube Cases - Gun Cases - Laptop Cases

 
Pelican™ 1450 Case with Foam (Desert Tan)

Pelican™ 1450 Case with Foam, Desert Tan, Overview

This Pelican™ 1450 case with foam Desert Tan comes with the Pelican™ unique Pick-N-Pluck™ foam. This foam is pre-cut which allows you to customize the interior by half inch cubes. Trace out the item you want in the case and simply pluck the foam out by hand, no tool required. You can customize your case in less that 15 minutes.

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican™ Protector Case that offers total; protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam for total subjection and protection against impact, vibration or shock. A nameplate (included) can be personalized (engraved at additional cost).

This case is NATO codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association). Unconditionally Guaranteed ... forever.

The Pelican™ 1450 case is one of the most popular Pelican™ medium size cases we have.  The size makes it perfect for a variety of gear, electronics, glasses, scopes, watches, and more.  Easy to carry and store the Pelican™ 1450 case is a great choice in the medium case category. 

Pelican™ 1450 Case (Desert Tan) Features:

  • Watertight, crushproof, and dust proof
  • Easy open Double Throw latches
  • Open cell core with solid wall design - strong, light weight
  • O-ring seal
  • Automatic Pressure Equalization Valve
  • Comfortable rubber over-molded handle
  • Stainless steel hardware and padlock protectors
  • Pick 'N' Pluck™ with convoluted lid foam
  • Personalized nameplate service available
  • Unconditional Lifetime Guarantee of Excellence
Pelican™ 1450 Case (Desert Tan) Specifications:
  • Dimensions Inside: 14.62" x 10.18" x 6.00" (37.1 x 25.8 x 15.2 cm)
  • Dimensions Outside: 16.00" x 13.00" x 6.87" (40.6 x 33 x 17.4 cm)
  • Lid Depth: 1.75" (4.4 cm)
  • Bottom Depth: 4.25" (10.8 cm)
  • Total Depth: 6.00" (15.2 cm)
  • Interior Cubic Volume: 0.52 cubic feet (14.63 cubic decimeter)
  • Weight with foam: 6.39 lbs. (2.9 kg)
  • Weight without foam: 5.51 lbs. (2.5 kg)
  • Buoyancy: 30 lbs. (13.61 kg)
  • Temperature Range: -40 / 210° F (-40 / 99° C)

Pelican™ 1450 Case with Foam, Desert Tan Material Part Number (MPN)

With Foam Cases
  • 1450-000-190: With Foam - Desert Tan 
Pelican™ 1620 Case with Foam (Desert Tan)

Pelican™ 1620 Case with Foam (Desert Tan)

Colors: Desert Tan

The Pelican™ 1620 case with foam comes with the Pelican™ unique Pick ‘N Pluck™ foam. This foam is pre-cut which allows you to customize the interior by half inch cubes. Trace out the item you want in the case and simply pluck the foam out by hand, no tool required. You can customize your case in less that 15 minutes.

The Pelican™ 1620  is unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof just like all Pelican™ Cases. These are just some of the features of this Pelican™ 1620 Case that offers total protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it strong and durable. Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. It is equipped with 2" (5 cm) hard rubber transport wheels, a retractable extension handle and multiple fold down carrying handles. Your equipment can fit into the high density foam or padded dividers for total subjection and protection against impact, vibration or shock.

The Pelican™ 1620 Case is another popular case in the Pelican™ large case category.  It's very similar in size to the 1610 case but with the 1620 you get more depth making it good choice for gear that might need a little more room.  The 1620 case comes with wheels and a pull handle making it easy to move around and travel with.  Check our the video below and let us know if you have any questions.

This case is tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association). Unconditionally Guaranteed ... forever. 

Pelican™ 1620 Features:

  • Watertight, crushproof, and dust proof
  • Easy open Double Throw latches
  • Open cell core with solid wall design - strong, light weight
  • O-ring seal
  • Automatic Pressure Equalization Valve
  • Fold down handles
  • Stainless steel hardware and padlock protectors
  • 3 level Pick 'N' Pluck™ with convoluted lid foam
  • Personalized nameplate service available
  • Unconditional Lifetime Guarantee of Excellence
  • Retractable extension handle
  • Strong polyurethane wheels with stainless steel bearings

Pelican™ 1620 Specifications:
  • Dimensions Inside: 21.48" x 16.42" x 12.54" (54.5 x 41.7 x 31.8 cm)
  • Dimensions Outside: 24.64" x 19.39" x 13.78" (62.6 x 49.2 x 35 cm)
  • Lid Depth: 2.01" (5.1 cm)
  • Bottom Depth: 10.53" (26.7 cm)
  • Total Depth: 12.54" (31.8 cm)
  • Interior Cubic Volume: 2.56 cubic feet (72.48 cubic decimeter)
  • Weight with foam: 24.62 lbs. (11.17 kg)
  • Weight without foam: 21.2 lbs. (9.62 kg)
  • Buoyancy: 149.91 lbs. (68 kg)
  • Temperature Range: -40 / 210° F (-40 / 99° C)

Pelican™ 1620 Case Material Part Number (MPN):

With Foam

No Foam

With Padded Dividers


Pelican™ History

For over 30 years Pelican™ has built a reputation for manufacturing the toughest cases in the world. As a matter of fact, Pelican™ invented the category. Over these years we've seen our cases used for some fairly crazy activities...and important ones too.

Pelican™ Cases have been thrown out of helicopters in Iraq, floated through frigid fjords in Norway and rolled over by SUVs in Tanzania. With only a few scratches to show on the outside, contents inside are left unscathed. These are minor details for major bragging rights. And that is really what it's all about. Getting your gear from point A to point B in the condition it's meant to be in: intact and functional. Because it might contain a large format camera that will shoot next month's magazine cover or a heart defibrillator that could save a person's life, you can't put a price on it.


See All Pelican™ Case Categories: All Pelican™ Cases - Micro Cases - Small Cases - Medium Cases - Large Cases - Cube Cases - Gun Cases - Laptop Cases

 
Loading...